Owner’s Manual PPG850A Guitar Amplifier 1 www.pyleaudio.
1) High Input Jack: Connect high 7) Channel 2 Controls: Same as for 2) Low Input Jack: Connect low 8) Reverb level: Adjusts overall 3) Gain: This sets the volume gain 9) Distortion: Adjusts overall level devices to this jack. Channel 1. level devices to this jack. reverb level for both channels. level for Channel 1. distortion effect. Turn to off for no effect. 4) Bass: This control adjusts the low frequency level. 10) Power LED: Illuminates when high frequency level.
Troubleshooting No Sound: Distorted Sound: 9 Check if the amplifier is overdriven. If it is, you will have to turn the level down. 9 9 Check signal source. 9 9 9 9 Check distortion effect control. Turn to off for no effect. 9 Signal sounds “discolored”: Check connections. Try a different cable. Check levels on amplifier. Confirm amplifier is getting a signal. Make sure nothing is plugged into the Phones jack. Intermittent Output: 9 9 Check and adjust the EQ settings. 9 Check signal source.