www.pyleaudio.
SPECIFICATIONS WIRELESS TRANSMITTER Antenna: RF Output: Spurious: Battery: External <10mW <-60dB one 9V battery CONTENTS CONTENTS 1.Introduction Pg1 2.Safety instruction Pg2 3.Parts description Pg3~Pg5 4.Troubleshooting Pg6 5.Specifications Pg7~Pg8 INTRODUCTION Thank you for purchasing our PPGW 1040 wireless guitar amplifier. We are confident you will have many years of use and enjoyment from our amp. Our new range of amps are a culmination of years of development, work and careful testing.
SAFETY INFORMATION 1. Read and follow instructions carefully. Store the instructions in a safe place for future reference. 2. Do not tamper with the power cord. 3. Protect the unit from contact with liquids. Do not place objects filled with liquid on the unit. Do not spray the unit with liquid cleaners. Clean with a slightly dampened cloth, wiping the surfaces. 4. If the amplifier has sustained damage, discontinue use. Refer immediately to qualified personnel. 5.
TROUBLESHOOTING TROUBLESHOOTING PARTS DESCRIPTION WIRELESS TRANSMITTER BELT CLIP BATTERY COVER AUDIO OUTPUT JACK VOLUME SWITCH POWER SWITCH AUDIO SWITCH 1. Check that the power cord is plugged into a power outlet. LOW BAT ON MUTE 2. Check that the power is turned on at the outlet. If you are at a gig, make sure the stage power has been turned on. 9V + If you are having trouble with your amplifier, these instructions below may help you before you call a service technician.
PARTS DESCRIPTION PARTS DESCRIPTION AMPLIFIER Front Panel 1 2 3 4 5 6 7 8 20 21 Mic Equalization PPGW-1040 Power WIRELESS GUITAR AMPLIFIER Low Batt Mic.
