System information

35
Example 1 (UHF):
ID Base Spacing TX Offset BandWidth
2 406.00000 0.01250 10.00000 0.01250
Base: 406.00000
CH Lo: Identifier * 4096
2 * 4096
8192
CH Hi: CH Lo + 4095
8192 + 4095
12287
Offset: 8192 (Same as CH Lo)
Step: 12.5Khz
Example 2 (VHF):
ID Base Spacing TX Offset BandWidth
3 136.00000 0.01250 -5.10000 0.01250
4 136.00000 0.01250 -5.20000 0.01250
Since there are multiple identifier tables in use on this site, you will need to use
the Multi-table configuration on the Pro-96. In this case two entries in the Pro-96
custom table would be needed as follows:
In the chart on a previous page, we can
see that identifier table number 3 starts
at channel 12288 and ends at channel
16383. Identifier table 4 starts at
channel 16384 and ends at channel
20479. Both tables share a common
base frequency.
In the example on the right from the
Extended Trunking Tables screen from
the Win96 program, you can see how
these tables would be entered.