System information

38
Macros:
In the example on the last page, you will notice macros are used to insert the
necessary information into the commands. Available macros are listed below:
$CR$ Insert a carriage return.
Macros Starting with $AF will insert the current active frequency into the
command in the format specified. Macros starting with $QF will be replaced the
configured Quiet frequency from Pro96Com. Examples of these macros will use
a frequency of 866.0125 and 42.74Mhz
Active Frequency Macros
Macro Ex: 42.74Mhz Ex: 866.0125 Description
$AF-0#######$ 00427400 08660125 Zero padded active frequency to 4 decimal
places with no decimal.
$AF-########$ 4274000 8660125 Active frequency to 4 decimal places, and
no decimal point.
$AF-0########$ 004274000 086601250 Zero padded active frequency to 5 decimal
places with no decimal point.
$AF-#########$ 4274000 86601250 Active frequency to 5 decimal places, and
no decimal point.
$AF-0###.####$ 0042.7400 0866.0125 Zero padded active frequency to 4 decimal
places with decimal point.
$AF-0##.####$ 042.7400 866.0125 Zero padded active frequency to 4 decimal
places with decimal point.
$AF-####.####$ 42.7400 866.0125 Active frequency to 4 decimal places, with
decimal point.
$AF-0###.#####$ 0042.74000 0866.01250 Zero padded active frequency to 5 decimal
places with decimal point.
$AF-0##.#####$ 042.74000 866.01250 Zero padded active frequency to 5 decimal
places with decimal point.
$AF-####.#####$ 42.74000 866.01250 Active frequency to 5 decimal places, with
decimal point.