- RadioShack Scanner User's Manual

41 Beyond the Basic

To resume chain search, press HOLD (if does not

appear on the display) or press SRCH (if appears

on the display).

storing frequencies found during

chain search into channel memory

You can store frequencies you find in chain search

mode or chain search hold mode.

X Press FUNC + PGM in chain search mode or

chain search hold mode. The lowest blank

channel and bank appear.

Y To select another channel, press FUNC + or

. To enter the frequency, press FUNC.

disappears. You can also press 0-9 to select the

bank.

Z Press E to store the frequency into the blank

channel.

If you try to save a frequency that is already stored,

the scanner sounds an error tone and displays the

channel that was duplicated. If you entered the

frequency by mistake, press

/CLR. To enter the

frequency anyway, press E to accept.

The scanner sets itself to program mode after you

store a frequency.