Cassette Player User Manual

16
USING THE CLOCK RADIO
Your receiver has two clocks. We rec-
ommend you set the primary clock for
local time and the secondary clock for
UTC (Coordinated Universal Time —
formerly called Greenwich Mean
Time), because most shortwave sta-
tions announce broadcast times in
UTC.
The time zone map on the back of the
receiver shows the difference in hours
between UTC and each time zone. To
determine your local time, tune your
receiver to a time standard frequency
(see “Time Standard Frequencies” on
Page 24) and get the current UTC
time. Then add or subtract the speci-
fied number of hours from UTC time.
During Daylight Saving Time, subtract
1 more hour.
SETTING THE CLOCKS
Follow these steps to set each clock.
Both clocks display the time in the 24-
hour format (0:00–23:59).
1. Repeatedly press the right
DUAL
TIME
button to select the clock
you want to set. appears when
the secondary clock is selected
and disappears when the primary
clock is selected.
2. Press
TIME SET
.
TIME SET
flashes on the display.
3. While
TIME SET
flashes, set
the correct time by pressing the
number buttons. Do not precede
single-digit hours with a 0. For
example, enter
930
for 9:30 AM.
If you make a mistake, press
C
(cancel) to erase the last digit.
Note:
If you wait more than 15
seconds to press a button,
TIME
SET
stops flashing and you must
begin again at Step 2.
4. Press
ENTER
. The clock starts
running from the time you set.
20-219.fm Page 16 Wednesday, August 4, 1999 9:23 AM