Owner`s manual

Starting the Tandy 200
1. Open the Tandy 200 case
and turn on the Memory Power
Switch:
Never turn this switch off. Doing
so causes you to lose all informa-
tion you have stored in the
Tandy 200.
2. Supply electric or battery
power:
If using electricity, connect the
Tandy 200 to an electric outlet,
using the Tandy 200 power
adapter. (Use only the Tandy 200
power adapter!)
If using batteries, insert them as
shown:
•o c
1
a
[.o c
•
3. Press the Power Switch, and
adjust the DISP dial to your
field of vision:
Battery power lasts 14 hours.
When the red battery indicator
turns on, you have about 20
minutes of battery power left:
2 / Starting Up