Specifications

Copyright 2014 Carl Bright Inc. All Rights Reserved
Page 24
When the output of the chromatograph is as desired, start the automatic calibration cycle by adjusting the knob
until “START CG CALIBRATION CYCLE” is seen and press the MUTE/ENTER button. A countdown will begin
on the display showing how long it will be until gases from the previous chromatograph cycle clear out, so that
the calibration cycle can start. When the calibration cycle is complete, the unit will be calibrated and the 5 part
gases will show equal gas units using the gas charting program.
Leave the bag connected for additional cycles if you wish to check the calibration.