Specifications

Vanner Power Group AutoThrottle Manual
- 2 -
Volt Guard Low Voltage Actuator
Model 70-VG
Heavy Duty Auto Throttle System
Model 73-46
Model—73-46
A Heavy Duty Automatic Throttle
System consisting of the solenoid/
cable assembly and the control
module assembly.
Model—73-48
The 73-48 Installation Kit consists
of an ON/OFF toggle switch,
02264* isolation diode, fuse, and
fuse holder.
Replacement Parts
Part Number Description
02264 25 amp bridge rectifier
73-44 73-46 solenoid and 46" cable assembly
02031 Control module with harness
02045 Solenoid without cable assembly
05235 30 amp Relay (‘96 Chevy Diesel 6.5L)
B00167 46" Cable Assembly
05006 Ring Terminal 1/4"
Conserve Fuel and Eliminate Over-Revving
With the Volt Guard Low Voltage Actuator
When your battery is fully
charged the Volt Guard allows
the engine to idle until the
voltage drops to 12.5 volts. It
then automatically activates the
Auto Throttle until the battery
has reached approximately 13.8
volts at which time the throttle is
released after approximately 90
seconds. The Volt Guard
automatically repeats this
process as often as necessary.
The Volt Guard can be used with Vanner as well as many other makes of automatic throttle
controls provided they are electrically activated (see wiring chart on back).