Owner's Manual

16
OTHER FUNCTIONS
Adjusting Squelch (1 to 20)
Squelch
Electrical interference will occur if other CB operators are using the same
channel. To avoid such interference, set the SQUELCH LEVEL higher than your
current setting. With a higher SQUELCH LEVEL, you will only receive signals
from the closest radio signal on your channel.
A squelch setting of 20 will receive strong signals and a squelch setting of 1 will
receive weaker signals but will produce noise at all times even when there is no
signal present.
Press the CB-SQL switch lever UP or DOWN to change the squelch level. •
To rapidly increase or decrease the squelch level, press and hold the CB-SQL
switch UP or DOWN.
The current squelch level is indicated on the display as CB-SQUELCH-LEVEL 20. •
SQUELCH LEVEL range: from 01 (min) to 20 (max)
Press the CB-SQL lever up
(increase Squelch level)
Press the CB-SQL lever down
(decrease Squelch level)