User's Manual

10 Customer Care Center 1-800-732-2677
To Turn the Receiver Collar On and Off
Use the Test Light Tool or a coin and turn the battery module until the word “ON” or “OFF” aligns with
the “triangle” symbol on the Receiver Collar. Note: To extend the life of the batteries, turn the Receiver
Collar off when it is not in use.
Important: If the Receiver Collar is left on continuously, the maximum battery life will be 10 days.
Receiver Collar LED – Function and Response
Receiver Collar Function LED Response
Turn unit on LED flashes 1 time and beeps
Any Transmitter button pressed On for length of button press
Low battery condition LED flashes 3 times every 5 seconds
Turn unit off LED flashes 2 times and beeps
Step 3
Fit the Receiver Collar
Important: The proper fit and placement of your Receiver Collar is important for effective operation.
The Contact Points must have direct contact with your dog’s skin on the underside of his neck.
To assure a proper fit, please follow these steps:
1. Make sure that the Receiver Collar is turned off.
2. Start with your dog standing comfortably (3A).
3. Place the Receiver Collar on your dog’s neck close to the ears. Center the
Contact Points underneath your dog’s neck, touching the skin (3B).
Note: It is
sometimes necessary to trim the hair around the Contact Points to make sure that
contact is consistent.
Do not shave the pet’s neck as this may
increase the risk of skin irritation.
3A
3B