User's Manual



Installing Your Invisible Fence
®
Brand Doorman
™
Step 1
Determine Pet Door Location
1A 1B
1A Measure and mark your pet’s shoulder height on the door.
1B Determine location for the pet door. Draw a vertical center line through the shoulder
height line using a level.
NOTICE
If homeowner’s door or other application is not level, the pet door must be
marked level to swing properly.
Step 2
2A Remove door from hinges
2B Place on level saw horses and pad to protect the door
Helpful Tip: Clamp or weigh down the door to prevent it from moving.
NOTE: The pet door can be installed with the door hanging based on your skill level.
2C Match the marked lines on the door with the shoulder and center lines on the
template. Tape the template in place.