User's Manual

www.petsafe.net 19
GETTING STARTED
PROGRAMMING
PROGRAMMING PASSport
™
The default factory settings programmed for your PASSport
™
can be customized to work for you and your pet(s).
Programming the PASSport
™
can be done by using the control panel or the PASSport
™
computer application. To use the
computer application, please see “Connect to Computer”.
Main Menu
After your PASSport
™
has been setup and your pet(s)
successfully programmed, the Main Menu displays. This
is the default screen on the PASSport
™
. Also, if you are
navigating a lower level menu , the screen will time out and
automatically return to the Main Menu if there is no activity
after two minutes. The Main Menu provides the following
options:
Setup: Allows you to change door settings for the PASSport
™
including operational mode, volume, date/time, low
battery mode and language. Also allows changes to pet settings including pet access mode, re-latch time, in-tone/out-
tone, adding a pet, removing a pet, renaming a pet and relearning a pet.
Pet n: Displays a list of all pets successfully programmed to the PASSport
™
(with n being the pet number assigned when
programmed if pet is not renamed) along with their current location. Also shows the pet history.
Door Settings:
The Door Settings screen allows you to customize the operation and settings of the PASSport Pet Access Smart System
™
.
To open the Door Settings menu, from the Main Menu select Setup> Door Settings. The Door Settings screen displays the
following options:
Door: Allows pet door operational mode to be changed with three mode options: SmartMode (default), Open or
Locked.
Lock Keypad: Allows the 5-Star Navigation to be disabled by setting a 4 digit pin number.
Volume: Sets the volume level for the audible beeps and sounds (such as In-Tone and Out-Tone) and can be changed
from level 1 to level 10 or set to off. Default volume level is 1.
Date/Time: Sets the date and time used by the PASSport
™
.
Low Battery Mode: Allows the door flap to be set to an
open or locked position with an optional audible beep when
powered by the PASSport Rechargeable Battery
™
and when
in a low charge status.
Language: Allows the current language to be changed.
Default language is English.
Door Operational Modes:
The PASSport
™
has three operational modes: SmartMode, Open and Locked.
SmartMode: Allows any pet with a programmed PASSport Key
™
to access the PASSport
™
as programmed for that
specific pet. This is the default operational mode setting.
Open: Allows the PASSport
™
flap system to remain unlocked so any pet or animal can enter or exit if wearing a
PASSport Key
™
or not. The PASSport
™
will function like a traditional pet door.
Locked: Shuts and locks the PASSport
™
flap system so no pet can enter or exit, even if wearing a PASSport Key
™
.