User's Manual

18 www.petsafe.net

FR ENES

STEP 4

Pair the Remote Transmitter

and Receiver Collar

If your Receiver Collar does not beep when

the Tone Button of the Remote Transmitter is

pressed, or if you feel the Receiver Collar

is not responding to the Remote Transmitter,

follow these steps to pair:

1. Start with the Receiver Collar off your pet

and powered off.

2. Press and hold the On/Off Button until

the Green LED light shuts off. When the

Green LED shuts off, release the On/Off

Button and the Receiver Collar LED will

 ash green.

3. Place the Remote Transmitter into pairing mode by pressing the

Stimulation Down (-) Button until the Digital Display shows P.

4. Press the Tone and Stimulation Buttons simultaneously (the Orange

LED should be lit) until the Receiver Collar  ashes the Green LED 5

times, indicating it has learned the Remote Transmitter ID.

5. Change the level to 1 Low by pressing the Stimulation Up (+)

Button on the Remote Transmitter and then press the Tone Button.

The Receiver Collar should emit a tone, verifying that it is paired

with the Remote Transmitter.

6. If the Receiver Collar does not respond, please contact the

Customer Care Centre.