User Manual

Customization
23
RADIO
1
MENU
AUTO
MANUAL
Display Thermostat Firmware & Radio Module Versions
1. Switch the thermostat to O Mode (see page 20 for details).
2. Press and hold
the Temperature
Adjust down
arrow for three (3)
seconds. The icon
is not visible in
O Mode.
3. The thermostat’s
rmware version
displays in the
Mode area of
screen.
4. Press the
Temperature
Adjust down arrow
to display the
thermostat’s radio
module version.
5. Press to return to the Manual screen.
Restore Thermostat & Z-Wave Module to Factory Default
1. Switch the thermostat to O Mode (see page 20 for details).
2. Press and hold the lower left corner of touch screen for ve (5)
seconds. The thermostat then resets itself, displays its current
rmware version, and restarts in O Mode.
Restore Z-Wave Module to Factory Default
1. From the Menu screen, touch Mate icon.
The Radio screen appears.
2. Touch & hold Mate icon ten (10) seconds
until you hear a beep. The thermostat will
restore the Z-Wave module to the factory
default settings.
Display Days Since Last Reset
1. Switch the thermostat to O Mode
(see page 20 for details).
2. Press & hold Temperature Adjust up
arrow, and the upper left will show the
letter “b” followed by three numbers.
The numbers indicate the days since the
device was last reset.
MENU Screen
MANUAL
RADIO
1
MATE
MENU
Restoring Settings