User Manual

2
CT102 Thermostat
Z Wave
®
Z-Wave
®
Reference
The CT102 can work in the same network with any other certied
Z-Wave device, regardless of manufacturer/vendor. See your specic
Z-Wave® controller’s User Manual for detailed instructions on
operating your thermostat through the network.
Behavior Note: When power is rst applied to this device
it will broadcast a Hail message followed by a Node
Information frame. This behavior is to maintain backwards
compatibility with older controllers that work with this line
of devices.
Advanced Z-Wave
®
Information
The CT102 supports compliant mapping of the Z-Wave
®
BASIC_
COMMAND_CLASS to the CT thermostat “Energy Saving” and
“Comfort Mode” as follows:
• Basic Set (Value = 0x00) = Set Energy Saving Mode
• Basic Set (Value = 0x01-0x63 & 0xFF) = Set Comfort Mode
Energy Savings applies a 4° F setback to the existing set point
temperature to comply with EPA recommendations for energy
savings.