Use and Care Manual
PG 16
WI-FI SETUP FOR RTCOA WI-FI MODULES
Before you set-up your Wi-Fi Thermostat to connect to the Internet, you will need access to these
items:
1. Your favorite Wi-Fi device (iOS device or PC with Wi-Fi connected to the Internet) that is
connected to your Wi-Fi network.
2. Your e-mail account to receive verication message.
3. Wi-Fi Thermostat powered from the C-Wire (Wi-Fi connection will not work on batteries-only
powering the thermostat. You must have a C-Wire or other 24 VAC power source connected to
your thermostat to operate the Wi-Fi radio).
When you have all of these close to the thermostat, please use your browser to go to ...
http://www.radiothermostat.com/remote/
You will be given interactive step-by-step instructions on how to connect your Wi-Fi Thermostat to
the Internet cloud server. You can do this from a Wi-Fi connected PC or iOS device (Mac or iPhone
or iPad). The iOS device usually provides the easiest path for connection to the cloud, but a PC will
work ne.
When you go to our website you will be asked to register and create an account on the cloud server
for all your thermostats. Once you have this account you can connect as many thermostats as you
like to it and organize them by street address.
To verify that you are you, an e-mail will be sent to you that you must respond to. It will have further
instructions and a link to complete your registration. You need to verify you are ready to connect to