Use and Care Manual
PG 17
Wi-Fi. Once we are sure you have the thermostat connected to the HVAC in your location, you will be
prompted to download the Wireless Setup Guide for your system (PC or iOS). This guide gives you
specic step-by-step instructions to make the connection.
For Android phone users, there is an Android app to control your thermostat. You will need to use
another device (PC or iOS) to connect and provision your thermostat. Then the Android app will be
able log in to your cloud server account and control your thermostat.
SAFE Screen - When you see this screen the CT32 is in SAFE
Screen. This means that the CT32 is undergoing a rmware
update. The CT32 is able to accept updated rmware from
time to time as supplied by the cloud server. You can initiate
an update when they are made available by your cloud service
provider. These updates usually take 4-5 minutes to complete.
When in SAFE screen the CT32 provides basic thermostatic
control for one stage of HEAT and one stage of COOL. [If you have a Heat Pump only AUX HEAT will
be available.] It will use default Target Temperatures of Heat 62
o
F - Cool 82
o
F. You can adjust Target
Temperatures up or down when in SAFE screen. The MODE can be set to HEAT, OFF, or COOL.
After upgrade completes the thermostat will resume full functions as before. Updates are only
available using a WiFi radios. Should the update fail the thermostat will remain in SAFE screen and
retry three times. If this process fails please contact the cloud service provider for options.