Instructions / Assembly

16
PG 16
Notes on your system
Customer support: 877-602-5028 or www.radiothermostat.com 1812-003-000 Printed in CHINA
1
PG 1
Install Guide CT80
• Your thermostat is a precise instrument, handle it with care.
• Turn off electricity to the HVAC system before installing or
servicing thermostat or any part of the system.
• Do not turn electricity back on until work is completed.
• Do not short (jumper) across electric terminals at the control
on the furnace or air conditioner to test the system. This may
damage the thermostat.
All wiring must conform to local codes and ordinances.
• This thermostat is designed for use with 24 volt AC and
millivolt systems (with a separate 24VAC power adapter).
• The thermostat relay load should be limited to 1.0 amp;
higher amperage may cause damage to the thermostat.
To avoid electrical shock and to prevent damage to the
furnace, air conditioner, and thermostat, disconnect the power
supply before beginning work. This can be done at the circuit
breaker, or at the HVAC system.
S
AV
E
E
N
E
RG
Y
HVAC
STAT
U
S
M
ENU
NORMAL
$0.05 KW
P
o
w
e
r
S
t
a
t
u
s
N
o
r
m
a
l
$
.
0
5
/
k
W
h
H
E
A
T
12:30pm
5/25 WED
T
A
R
G
E
T
77
o
T
E
M
P
H
U
M
I
D
2
3
%
FAN
o
F
Caution
ENGLISH
Caution
H

Summary of content (8 pages)