Users Manual

13 14
&KDSWHU௅&RPSXWHU3URJUDPPLQJ
Clear Tail
Clear tail only can be adjusted on the software. During the call, the transmitter releases the PTT
EXWWRQWRVWRSWUDQVPLWWLQJDQGWKHUHFHLYHUZLOOUHFHLYHDKDUVK³FOLFN´VRXQGFDOOHGWKHWDLOVRXQG
Programming software is available at www.radioddity.com/support.
Before programming, please purchase the programming cable, which is available on radioddity.com.
Appendix A. - Troubleshooting
Symptom Possible Solution
The radio
doesn't start
The battery dies
quickly
The LED indicates
reception, but the
speaker is silent.
Others can’t hear
my transmission.
The radio transmits
without touching the
PTT.
The battery is too low.
The battery isn't correctly
installed.
The battery is dead.
The battery isn't fully
charged.
Volume is too low.
CTCSS or DCS enabled.
Their CTCSS or DCS
settings don’t match yours.
You're too far apart.
The VOX is enabled.
VOX sensitivity is too high.
Change or recharge the battery.
Remove the battery and reinstall it.
Purchase a new battery.
Recharge the battery.
Turn up the volume.
Change your CTCSS or DCS to
match those you're trying to
communicate with.
Turn CTCSS or DCS off.
Change your CTCSS or DCS
Settings to match your peers.
0RYHLQFORVHU
Turn VOX off.
Turn down VOX sensitivity.