User Manual

4-1
DrillTrack G2 Function keys
Receiver.
On/Off Key
Press to switch the DrillTrack G2 Receiver On or Off
Depth Key
Press to transfer the current DataSonde depth to
the DrillTrack G2 DataView. An audio beep will
confirm the depth transfer to the DataView.
Manual Depth
When in the “Four Arrows Locate” screen, within
a radius of about 50 cm (20 in) of the actual locate point,
press to get a depth indication readout on the screen.
Borelogger Operation
Press and hold to enter the BORELOGGER Mode.
(for Borelogger instructions see page 5-8)
Calibrate Operation
While the Receiver is turned off, press and hold the
depth key, then press the On/Off key to switch the
unit on and enter the DEPTH CALIBRATION Mode.
(for depth calibration instructions see page 5-6)
Manual Key
Press to toggle between the “Steering” (compass) and
the “Four Arrows Locate” screen in the AUTOMATIC Mode.
Press and hold to enter the REMOTE Mode.
In the REMOTE Mode, press and hold to enter the MANUAL Mode.
To exit from either REMOTE or MANUAL Mode, press the
Manual key to return to AUTOMATIC Mode.
Backlight Operation
While the Receiver is turned off, press and hold the
Manual key, then press the On/Off key to switch the
unit on and illuminate the backlight.