Installation Guide

RadioFrame System
Equipment Commissioning
RFN_3.1 Beta 95
5.5.2.4 Main Rack
Record the following information for the main rack.
Yes No
CSU grounded
5 Mhz “A” split w/ “T”
5 Mhz “B” split w/ “T”
5.5.2.5 T1 Line
Record the following information for the T1 line.
T1 circuit ID # Primary Secondary
T1 surge arrestor installed/grounded
Yes No
T1 repeater shelf/cfl cabinet location
Inside Outside
T1 level at extended demarc (RJ48x jack)
+/- dbsx Voltage
5.5.3 RadioFrame System As-Built Documentation
As-built documentation for the RadioFrame Networks equipment includes the
following:
• Equipment inventory
• Cabling pathways
• Floor Plan with site configuration and component locations
5.5.3.1 Equipment Inventory
The final Equipment Inventory should show the following information for the RFS
components installed:
• Part number
• Serial number
• Rack position (NCUs and ACUs only)
• Card position (APCs and NPCs only)
• RFU location (including floor and sector)
• iDEN RadioBlade and RAP positions in RFU
• Universal Repeater Unit (URU) location
• MAC Address
• IP Address