Installation Guide
Table Of Contents
- Title
- Contents
- Introduction
- System Description
- Pre-Installation
- Receipt of Equipment
- Site Planning
- Main Rack and Supporting Hardware
- Remote ACUs
- RFUs
- RadioBlades
- RAPs
- URU
- Interconnecting Cabling
- Main Rack Configuration
- RF Planning
- Site Survey
- Alarm Configuration
- Tools Required
- Installation
- Equipment Commissioning
- iDEN Interface
- Power Plant
- RadioFrame System
- Coverage Validation
- Site Acceptance Guidelines
- RadioFrame System Functionality Test
- RadioFrame System iDEN Functionality Test
- Interconnect & Dispatch Setup & Voice Quality
- Packet Data Service Connection and Latency
- Short Message Service
- Handover and Cell Reselection
- Interconnect Connection Stability and SQE Performance
- Dispatch Connection Stability
- Idle SQE Testing and Validation
- System Self-Recovery Test
- Packet Data Stability and Throughput
- Validation of ‘Unable to Key BR’ Alarm
- Rectifier & AC Power Alarms
- iSC-3 Functionality Test
- RadioFrame System iDEN Functionality Test
- Connecting the RFS to the Customer LAN
- Operations and Maintenance
- Appendixes
Method of Procedure
Equipment Commissioning
84 RFN_3.1 Beta
• Home—displays a welcome banner and a link for setting up users and
changing the RFS password.
• System Configuration—displays the configuration of each RFS
component, and depicts the location and status of each component,
including the NCU, ACUs, and RFUs.
• Alarms—displays alarm information for each component of the RFS.
• Performance Monitoring—displays real-time performance information
about the RFS.
• Support—displays support information, including online help.
3 To log in, select any tab except the Home tab.
The login page appears (see the following illustration).
4 For User Name, type your RFS user name.
5 For Password, type your RFS password.
6 To save the password so you don’t have to retype it the next time you log in,
check ‘Save this password in your password list’ checkbox.