User's Manual

MC-Series System Installation & Testing
System Description
30 RadioFrame Networks, Inc.
2.5.8 Heat Load
Supplier Component BTUs per Hour
RadioFrame Networks BIC 340
AIC 340
RBS 320
RF Shelf 680
PDU 0
Non-RFN iSC-3 140
EAS 170
CSU 17
2.5.9 RF Performance
The MC-Series System will meet the emissions mask requirements per FCC Part 90, section
90.691.
2.5.9.1 Frequency of Operation
Band Receive Frequency (MHz) Transmit Frequency (MHz)
800E 806.0125 to 824.9875 851.0125 to 869.9875
2.5.9.2 Transmitter Performance Summary
Value Parameter
1
Condition
Min Typ Max
Unit
2
Tx Output Power per
carrier (maximum)
Typical output power +8.0 +10 +12 dBm
Tx Power Output
Range per carrier
-20 +10 dBm
Tx Output Power
Variation
-20dBm ≤ Pout ≤ +10 dBm
851.0125 ≤ f ≤ 869.9875 MHz
-2.0 2.0 dB
Transmit port VSWR Referenced to a 50 ohm
impedance
2:1 -
Downlink Signal Quality
Estimator (SQE)
Average value 30 dB
Occupied bandwidth Per carrier 18.5 kHz
RF Frequency
Tolerance (TX)
Average frequency ± 50 Hz
Note 1: Unless otherwise stated, all values are referenced to the top of the rack.