User's Manual

MC-Series System Installation & Testing

Scheduled and Unscheduled Maintenance

RadioFrame Networks, Inc.

Event Description

 Duration Threshold=10

Action

 Create trouble ticket.

 Contact Field Technician.

 TS/BR

7.4.3 System Manager Alarms Sent to the OMC

The table below lists System Manager alarms that are sent to the OMC, the OMC alarm

message, and the severity of the alarm.

OMC Alarm System Manager Alarm Severity

BOARD DISABLED 1.2.3.4 PEER LOSS CRITICAL

COVERAGE HOLE COVERAGE HOLE MAJOR

EXCESS RESETS EXCESS RESETS CRITICAL

ISC VER MISMATCH ISC VER MISMATCH MAJOR

NO SPAM IN APC APC NO SPAM CRITICAL

RADIO BLADE LOST IDENRB LOSS MINOR

RB ASSOC ERROR RB ASSOC ERROR MAJOR

RF SHELF 1, 2, or 3 RF SHELF MINOR MINOR

STARTUP FAIL STARTUP FAIL MINOR

TEMPERATURE CRITICAL TEMPERATURE CRITICAL CRITICAL

TEMPERATURE MAJOR TEMPERATURE MAJOR MAJOR

7.4.4 System Manager Alarms

This section lists MC-Series System alarms numerically by alarm ID (0x01, 0x02, etc.) with the

alarm description as the title of the subsection. These alarms are based on the X.733 conventions

for telecommunications equipment. For more information about field descriptions, refer to section

7.4.1 Viewing System Manager Alarms.

The service can be (asp – platform, iden- iden application, wlan – wireless application). The

cause refers to the x.733 cause type. System reaction describes the action taken by the system

as a result of this alarm and repair actions provides details on what corrective action should be

taken as a result of this alarm.

The Alarm details on the active alarm manager page of the system manager will provide

additional information with respect to the board, slot number, mac address, equipment type etc. is

available in System Manager.