User's Manual

Proprietary and Confidential Information

MC-Series Standard Capacity system998-1019-01 Rev X1

Table 9.1 FRU Table

9.1.2 Field Replaceable Units (FRUs), Parts and Extra Supplies

It is recommended that the spares for the MCSC system and maintain inventories

in Logistics Centers for ordering on an as-needed basis.

The MCSC system has been designed so that Field Replaceable Units (FRUs)

can be replaced to restore normal system operation as quickly as possible. Refer

to the previous section 9.1.1 and the FRU table, Table 9.1.

For equipment not supplied by RadioFrame Networks, such as the EAS, iSCIII, or

CSU, follow standard and procedures for FRU replacement.

Note: The previous section contains recommended part

numbers (P/N) and manufacturers of various

hardware, tools and equipment used during the

installation, operations and maintenance of the

MCSC system.

9.2 Power Down Procedure

When powering down the entire MCSC system, follow these instructions.

RadioFrame

Networks PM

Description

176-0610-XX Power Distribution Unit (PDU)

176-1040-XX Airlink/BTS Interface Chassis (BIC)

176-7090-XX Rx Filter

176-1076-XX RF Shelf

176-1030-XX Diversity RadioBlade Transceiver Shelf (DRBS)

176-0180-XX Fan DRBS

176-1090-XX 800E Tx Filter

176-1223-01 Outdoor Pole Mount cabinet

176-1219-XX Fan Tray (w/fans) for an ABIC Chassis

176-0011-XX Fan for DRBS and RF Shelf

176-7555-XX Base Processing Card (BPC) w/(2) SPAM-HC

176-7540-XX MC Common RadioFrame Interface Card (CRIC)

176-7562-XX Ethernet Rear Transition Module (ERTM)

176-0820-CC Coaxial RMII Transceiver Card (CRTC)

176-7502-XX 4U Chassis

176-0860-XX MCRB iDEN FRU