User's Manual

MC-Series Standard Capacity system
998-1019-01 Rev X1
9-6 ©2008 RadioFrame Networks, Inc. MC-Series
Proprietary and Confidential Information
d. RF shelf 2
e. RF shelf 3
2. Disconnect cabling from the back of the chassis to be replaced.
a. Disconnect the cabling from the rear of
RF Shelf..)
Table 9.2 Cables to Disconnect from Rear of RF Shelf
3. Remove the four front mounting screws and remove the RF shelf from the
cabinet, and then package it for shipment.
Figure 9.2 RF Shelf Mounting Screw Locations
4. Mount the replacement RF shelf.
Index Disconnect From To Type
H RF Shelf x: power PDU: RF x power
A
RF Shelf x: ground GND BAR ground
U-A
RF Shelf x: Tx IN A DRBS 1: Tx A RF cable
S-A
RF Shelf x: Rx OUT A DRBS 1: Rx A RF cable
L
RF Shelf x: TX 800E OUT TOR: Tx 800E x RF cable
I
RF Shelf x: RX 800E IN TOR: RF 800E x RF cable
T
RF Shelf x: ALARM DRBS: ALARM INPUT A serial