User's Manual

Proprietary and Confidential Information

MC-Series Standard Capacity system998-1019-01 Rev X1

Figure 1.12 MCRB Label Position

A. Combined RadioBlade Transceivers in an DRBS

The MCRB allows up to 6 BRs to be assigned to a single physical RadioBlade

transceiver with a requirement applied that all carriers need to be within a 1.25

MHz band. Because of this requirement, all frequencies need to be known prior

to the programming of the MCRB. To accommodate this, all BRs set up in the

iDEN configuration page will register with the network to get assigned

frequencies. Once the frequencies are known, and the available HW resources

are known, the carriers are assigned to the MCRBs by the following rules:

1. Control channels are assigned first.