Manualshelf

User's Manual

ManualsBrandsRadioFrame Networks ManualsElectronicsiDEN RadioBlade
21222324252627282930
Installing the RadioFrame System
20
Figure 11 Use the provided bracket when mounting an RFU on the ceiling,
ensuring that all bolts or screws penetrate wood.
Connect the RFU to the ACU
1 Connect the RJ45 port labeled MAIN on the top of the RFU to the wall jack using
an RJ45-to-RJ45 CAT 5 cable (see the following illustration).
Caution
Do not remove the protective cover from or use the RFU port labeled
AUX. Damage may occur to the RFU, ACU, or both.
2 Verify that the RFU is receiving power and connectivity from the ACU.
The Link and Activity LEDs on the MAIN port should light as green, and the
Activity LED should blink rapidly indicating connectivity. The LED on the
backplane should also light as green. If any LEDs do not light, refer to
“Troubleshooting.”
3 Complete the next procedure “Insert the RadioBlades” before placing the front
cover on the RFU.