User's Manual

Installing the RadioFrame System
21
Figure 12 Connect the RFU to the ACU and ensure that the RFU is receiving
power and connectivity from the ACU.
Insert the RadioBlades
RadioBlades are shipped several to a box in individually wrapped anti-static
packaging. Each box of RadioBlades includes a disposable anti-static wrist strap
to be used when inserting the RadioBlades into the RFU. Refer to the SDS for the
exact installation location of each RadioBlade in the RFU.
1 Unwrap 30 cm (12”) of the disposable wrist strap and warp the adhesive side
around your wrist.
2 Unroll the rest of the band and remove the liner from the copper tape.
3 Attach the copper tape to the metal card cage inside the RFU.
4 Insert the RadioBlades, one at a time, into the specified slots (1 through 7) in the
RFU until the connector on each RadioBlade seats firmly into the back of the
RFU.