Operating instructions

NETGEAR Wireless N150 Access Point WN604 Reference Manual
2-6 Basic Installation and Configuration
v1.0, March 2010
This unique name is the access point NetBIOS name. The default Access Point Name is
located on the bottom label of WN604. The default is netgearxxxxxx, where xxxxxx
represents the last 6 digits of the WN604 MAC address. You may modify the default name
with a unique name up to 15 characters long.
5. From the Country/Region pull-down menu, select the region where the WN604 can be used
(the default Country/Region is the United States).
6. Select Time from the left panel. The Time screen displays, as shown in Figure 2-3.
7. Enter the Time Settings for your area. See the online help or “Configuring Time Settings” on
page 2-7 for more information about how to configure the settings on this screen.
Note: If your country or region is not listed, please check with Netgear Support.
Figure 2-3 Timezone and system time related settings