Operating instructions

NETGEAR Wireless N150 Access Point WN604 Reference Manual
3-22
v1.0, March 2010
4. Click Apply to save your settings.
Restricting Wireless Access by MAC Address
The optional Access Control window lets you block the network access privilege of any specified
stations through the WN604 Wireless Access Point. When you enable access control, the access
point only accepts connections from clients on the selected access control list. This provides an
additional layer of security.
To restrict access based on MAC addresses:
1. Log in to the WN604 using the default address of http://192.168.0.100, user name of admin
and default password of password, or whatever LAN address and password you have set up.
2. Under the Configuration tab, select Security on the main menu, select Advanced from the
left panel, and then select MAC Authetication. The MAC Authetication screen displays.
Note: If configuring the WN604 from a wireless computer whose MAC address is not in
the access control list, if you select Turn Access Control On, you will lose your
wireless connection when you click Apply. You must then access the wireless
access point from a wired computer or from a wireless computer that is on the
access control list to make any further changes.