User manual

Chapter 6. Advanced Settings | 81
N150 Wireless ADSL2+ Modem Router DGN1000 User Manual
• The Gateway IP Address field specifies that all traffic for these addresses are to be
forwarded to the ISDN router at 192.168.0.100.
• The value in the Metric field represents the number of routers
between your network and
the destination. This is a direct connection, so it can be set to the minimum value of 2.
• The Private check box is selected only as a precautionary security measure in case RIP
is activated.
Configure Static Routes
1. Select Advanced > Static Routes to display the following screen
Figure 50. View additional routing information
2. To add a static route:
a. Click Add to open the following screen.
Figure 51. Add static routes
b. In the Route Name field, enter a route name for this static route. This name is for
identification purpose only.
c. Select Private if you want to limit access to the LAN only. The static route will not be
reported in RIP.
d. Select Active to make this route effective.