Manualshelf

User Manual

ManualsBrandsRadiolink electronic ManualsData Communication and Human Input DevicesRadiolink 10-CH 2.4GHz DSSS & FHSS Receiver
123
Two operating modes output:
1. PWM signal working mode:
Red LED indicates PWM signal output, 6 channels totally.
2. SBUS signal working mode:
Blue/purple LED indicates SBUS/PPM signal output, CH1 output PPM signal, and CH2 output SBUS
signal, CH3 output CH3 PWM signal (for helicopter) and CH4 to CH6 output CH8 to CH10 independent
PWM signal simultaneously, 10 channels signal totally.
SBUS/PPM and PWM signal change:
Short press the ID SET switch twice within 1 second, the signal is changed from normal PWM to
SBUS/PPM. The red LED indicates the normal PWM and blue/purple indicates SBUS/PPM.