Data Sheet

R8FM

(FHSS)

Radiolink R8FM, 2.4G 8 channels receiver, 2.5 gram weight, S-BUS and PPM signal support, use

for Radiolink transmitter T8FB, is the best choice for racing drone.

Two signal working mode:

Blue/purple LED, S-BUS signal , 8 channels totally.

Red LED always, PPM signal, 8 channels totally.

S-BUS and PPM signal change:

Quick press the ID SET switch two times within 1 second, the signal is changed from S-BUS to

PPM. The red LED indicates the PPM and blue/purple indicates S-BUS.

How to match code with transmitter:

1. Put the transmitter and the receiver close to each other within 1 meters.

2. Turn on the transmitter, then power on the R8FM.

3. Connect CH3 of R8FM to ESC.

PAGE 1
R8FM (FHSS) Radiolink R8FM, 2.4G 8 channels receiver, 2.5 gram weight, S-BUS and PPM signal support, use for Radiolink transmitter T8FB, is the best choice for racing drone. Two signal working mode: Blue/purple LED, S-BUS signal , 8 channels totally. Red LED always, PPM signal, 8 channels totally. S-BUS and PPM signal change: Quick press the ID SET switch two times within 1 second, the signal is changed from S-BUS to PPM. The red LED indicates the PPM and blue/purple indicates S-BUS.
PAGE 2
4. There is a black button on the R8FM, press the binding button twice in two seconds and release, receiver light start blinking, after about blinking 8 times, match code success then receiver signal LED always on! Specification: 1) Channels: 8 channels 2) Working voltage: 4.8-6V 3) Working current: 30mA（input voltage: 5V） 4) Size: 16.0*21.5*1.0MM 5) Weight: 2.5g 6) 2048 section precision, 0.5us per section, servo anti-shake rudder.