User's Manual

29
Adjustability:
• Count down t imer: starts from the chosen time, displays time remaining. If the time is exceeded, it
continues to count below 0.
• Count up timer: starts at 0 and displays the elapsed time up to 99 minutes 59 seconds.
• Count down timer (Stop type): starts from the chosen time, displays time remaining, and stops at 0.
• Model timer: cumulates ON time up to 99 hours 59 minutes each model. Once Model timer function is
turned off, the cumulate time will also be reset to "0:00".
• Independent to each model, and automatically updates with model change.
• In either TIMER mode, the timer beeps once each minute. During the last twenty seconds, there's a beep
each two seconds. During the last ten seconds, there's a beep each second. A long tone is emitted when the
time selected is reached. (UP/DOWN TIMER)
• To Reset, choose the desired timer with the CURSOR lever (while at the startup screen), then press and
hold DIAL for 1 second.
• Activation by either direction of SWITCH A-H, by THROTTLE STICK (STK-THR) (Using the
THROTTLE STICK is convenient if you are keeping track of fuel remaining, or for an electric, how much
battery is left), by LOGIC SWITCH Lsw1-Lsw3 or by the power SWITCH (PWR SW).
• Also t he reset switch can be assigned (SWITCH A-H or LOGIC SWITCH Lsw1-Lsw3)
Goals Steps Inputs
Set timer 2 to count
down 4 1/2
minutes,being
controlled by Throttle
Stick position. This
utilized to keep track of
catual Throttle on time
to better cooperate with
fuel/battery usage.
Open BASIC menu,then to
TIMER
for 1s .(If ADVANCE again) .
to TIMER ,PUSH
Go to TIMER <2>
to TIMER <2> ，PUSH
Adjust time to 4min.30sec.,
count down
to 4,PUSH.
to 00 TIMER<2>，PUSH to 30,PU SH
Assign switch at ST-THK and
set trigger point.
to SWA TIMER<2>，， to ST-THK，PUSH
Throttle Stick down to 50%,PUSH for 1s to
NULL.
Throttle Stick down to desired position(Ex:1/4
stick) PUSH button for 1s to set.
Close
2.3.13 TRAINER:
For training novice pilots with optional trainer cord connecting 2 transmitters. The instructor has several
levels of controllability.
【
TRAINR
】
1
：
AILE FUNC
INH
2
：
ELEV FUNC
3
：
THRO FUNC
CH1
：
AILE
4
：
RUDD FUNC
FUNC
5
：
GEAR FUNC
6
：
FLAP FUNC
7
：
AUX1 FUNC
8
：
AUX2 FUNC
Adjustability:
• NORM: When the TRAINER SWITCH is ON, the channel set to this mode can be controlled by the
student. The set channel i s controlled according to any programming set at the student's transmitter.
• FUNC: When the TRAINER SWITCH is ON, the channel set to this mode can be controlled by the
student, controlled according to any mixing set at the instructor's transmitter.