User's Manual

5.2.1 Swash Plate Types

Goals Steps Inputs

Change the model

type and swashplate

of model#3 from

aircraft tp 120 degree

CCPM with 2 servos

working in unison

for collective pitch

and aileron (Ex:

HELI HR3)

Confirm you are using

the proper model

memory(Ex:3)

On home screen,check model name and # on top left. If it is

not the correct model (Ex:3) see MODEL SEL.

Open PARAMETER,go

to MODEL SEL.

for 1s to BASIC.(If ADVANCE again) .

to MODEL SEL.

Select proper MODEL

TYPE (HELICOPTER)

Confirm

to TYPE. ， to HELICOPTER. for 1sec. ‘Are you

sure?’ Displays.

Change to desired

SWASH TYPE (Ex:

HR3) Confirm.

to SWASH. ， to HR3，

for 1 sec. ‘Are you

sure?’ displays.

Radio emits a repeating “beep” and shows progress on screen as the model type is being changed. Note that

if the power switch is turned off prior to completion, the model type will not be changed.

5.2.2 SWASHAFR (not in SWH1):

Except SWASH PLATE, function menu of helicopter is same as GLID/ ACRO. Please find the former

instructions.