User's Manual

ADJUSTABILITY:

• On/off may be separate from speed switching by plugging governor on/off into CH8 and changing

CUT-CH setting.

• If using separate on/off, switch assignment is totally adjustable. Be careful not assign governor off to a

condition switch if you want the governor to function in that condition.

• Speed switching and governor ON/OFF may be together using one switch or ON/OFF switching may be

performed using an independent switch/channel.

• When speed setting control uses CH7 and separate ON/OFF switch is not used, CH8 can be used for other

functions.

•

In-flight adjustment of the head s peed (for easy adjustment during turning) may be created using an

additional channel and a programmable mix.

The GV-1 controls throttle when it is active, so the throttle will not obey any FailSafe settings preset for

throttle in the t ransmitter. Always set the FailSafe setting for the GV-1's on/off channel to OFF. This way

the governor is shut off and the throttle obeys the FailSafe throttle commands.

Goals Steps Inputs

Set up a governor to use

both chan n els into the rec eiv er

and swi t ch betw ee n the

Open and activate the

GOVERNOR

Function.

to BASIC menu, again to

ADVANCE

to GOVERNOR