User's Manual

14
2. Choose Port Number(T8FB connection COM will automatic identified when connect to
computer), setting baud rate: 115200, 8-1-None(8 data bits,1 stop bit,no parity check),click
“CONNECT”.(P3)
（P3）
2.2 Software description
“READ”:
Computer will read data from transmitter and show on the computer when click “READ”(red
and green LED will quick flashing when reading).
“LOAD”:
Load configured TXT files.
“UPDATE”:
Write down the new data you want and then click “UPDATE” to change the defaulted
parameter. T8FB will remember the new data you have write down(red and green LED will
slowly flashing when updating).
“SAVE”:
Save current setting to TXT files.
“PHASE”:
Changes the direction an individual servo responds to a control stick motion.
“SUB-TRIM”:
Makes small changes or corrections to the neutral position of each servo. Range is -120 to
+120, with 0 setting, the default, being no SUB-TRIM.
We recommend that you center the digital trims before making SUB-TRIM changes, and that