User's Manual

5
1.2 T8FB remote control system
1.2.1 Transmitter
1) One two-way switch, one three-way switch, two VR switches, four trimmers, two sticks.
2) Defaulted MODE2, SwB control CH5, VrB control CH6, SwA control CH7, VrA control
CH8.
3) Defaulted low battery alarm voltage is 11.1V, can setting in the T8FB configure software.
1.2.2 Receiver: R8EH
R8EH: 8 channel receiver support S-BUS, PPM and PWM signal at the same time.
8 channel receiver R8EH（signal type: PWM&S-BUS&PPM）
R8EH Specification:
1. S-BUS/PPM/PWM
Compatible with FUTABA S-BUS connection port, S-BUS, PPM and PWM signal are possible to
use at the same time.
PWM signal mode: Green LED, output 8 channel PWM signal.
SBUS/PPM signal mode: Both red and green LED on, CH1 output S-BUS signal, CH2 output
PPM signal, CH3 to CH8 output PWM signal at the same time.
2. Operating voltage: 4.8~10V.
3. Operating current: 19~25mA(input voltage 5V)
4. Size: 48.5*21*11mm
5. Weight: 7g
6. Section precision: 4096
1.2.3 Bind
Each transmitter has an individually assigned, unique ID code. In order to start operation,
the receiver must be linked with the ID code of the transmitter with which it is being paired.