Manual

Radiolink Electronic Ltd
www.radiolink.com
17
2.2.3 Transmitter Parameters Setup
The flight controller of WOLF QAV210 has been set with all necessary parameters before
purchasing. For the stand-alone version, please calibrate the transmitter sticks, set the flight
modes and Fail Safe.
2.2.3.1 Transmitter Calibration
Before the transmitter sticks calibration in Mission Planner, please make sure the model type
selected in transmitter is multi-rotors and the phase is REVERSED. Below detailed steps take AT9S
as an example while T8FB can be directly calibrated with sticks. For the calibration of other
brands’ transmitter, please kindly refer to the its instruction manual.
Press “MODE” for more than 1s to enter the BASIC MENU and choose “MODEL TYPE”,
rotate the dial to select “MULTIROTORS”and press “PUSH”to save, then “END”to exit.
Note: For AT9S, the throttle phase needs to be set REV while that of T8FB and AT10II are REV
by default.
Press “MODE”for 1s to enter the BASIC MENU and choose“STEERING REVERSE”and select
3: THROTTLE. Then “PUSH”to select and rotate the dial to “REV” and “PUSH”to confirm
then “END”to exit.
[MODEL TYPE]
RESET: Execute
TYPE: MULTIROTOR
ATLE-2: CH6 or 7
ATL: OFF
[ REVERSE ]
CH3: THRO
REV NOR
CH9 : REV
CH10: NOR
AILE NOR
ELEV NOR
THRO REV
RUDD NOR
ATTI NOR
AUX1 REV
AUX2 NOR
AUX3 REV