Manual

Radiolink Electronic Ltd
www.radiolink.com
18
Make sure binding between the transmitter and the receiver is complete before connecting
Mini Pix with Mission Planner on computer via USB cable with the Baud Rate of 115200 . The
connection between Mini Pix and Mission Planner can be also achieved by data transmission with
the Baud Rate of 57600. Then power on the transmitter. Press PUSH to unlock the transmitter if no
operation for a long time and it enters standby mode.
Open Mission Planner => select the corresponding Baud rate and port => click to connect
=> INITIAL SETUP =>MANDATORY HARDWARE => RADIO CALIBRATION =>CALIBRATE RADIO
Note: Ports varies from different computers. Please select the correct port to connect.
Connection may fail with several ports in use. Please remove the other connections.
There will be a safety reminder as below shown popping out when pilots click “Calibrate
Radio”. Please double check before clicking “ok”.