Manual

Radiolink Electronic Ltd
www.radiolink.com
2
Thanks for purchasing Radiolink WOLF QAV210.
To fully enjoy the benefits of this product and ensure safety, please read the introduction
carefully and set up the device as described below:
If any problems found during the operation process, please kindly refer to the manual first. Then
pilots could contact our distributors to find solution or follow our Facebook homepage
https://www.facebook.com/Radiolink-1455452961436694/ to search related key words. Also
pilots can send questions to [e-mail] or [e-mail]
and we will answer your question at the earliest.
Due to unforeseen changes in production procedures, the information contained in this manual is
subject to change without notice.
For more information please check our website http://www.Radiolink.com and follow our
Facebook and youtube homepage.
SAFETY PRECAUTIONS
 Never operate models during adverse weather conditions. Poor visibility can cause
disorientation and loss of control of pilots model.
 Never use this product in a crowd or illegal areas.
 Make sure no props installed when setting parameters of Mini Pix (the flight controller) on
Mission Planner (MP) or calibrating ESC.
 Always ensure the trim levers at 0 and battery properly charged before connecting the
receiver.
 Always check all servos and their connections prior to each run.
 Stay at a certain distance from the aircraft during flight to avoid getting hurt by the
components of high-speed rotation (eg. Props, brushless motors)
 After landing off, make sure the aircraft is disarmed and props have stopped moving before
getting close to touch the aircraft.
 Always be sure about turning off the receiver before the transmitter.
 When removing battery, NEVER pull the wires but please do press the yellow port with one
hand and pull the other yellow port with another. If the wrapping materials damaged , the