Manual

Radiolink Electronic Ltd
www.radiolink.com
20
CH4: low position = yaw (anti clockwise), up position = yaw (clockwise).
After each green bar reaches the limits/red lines, click the green button at bottom right to
complete the transmitter calibration.
2.2.3.2 Flight Modes Setup
Setup in transmitter
Setup steps of Radiolink transmitter(T8FB/AT9S/AT10II) and flight controller with Mission
Planner are as below. For the transmitters from other brands, please select CH5 to set flight
modes and SBUS output in receiver.
Mini Pix has various flight modes for option. But WOLF QAV210 is with four flight modes as
factory setting by default including Stabilize Mode, Alt-Hold Mode, Pos-Hold Mode and RTL
Mode. Therefore, if no other flight modes needed, pilots just set the flight modes in transmitter
corresponding to those in flight controller.
The default parameters of T8FB is set as that of Mini Pix. If it is the transmitter model of T8FB
purchased with WOLF QAV210, then this part can be skipped as the flight modes are already set
identical. Pilots only need to calibrate joysticks and ESC.