Manual

Radiolink Electronic Ltd
www.radiolink.com
22
3. Default channel is CH5 while setting the 3-way switch as SWC and the 2-way switch as
SWA or SWD, pilots can personalize the setting basing on own flight habits
Note: The PWM value ( RATE on the second column as below shown) can be modified with
corresponding POSI (eg. UP-UP) while SWT is (ON). Toggle positions of SWC and SWA/SWD to
select different POSI.
4. When flight mode 1 in MP is Stabilize, the first ATTITUE on transmitter should be set as
Stabilize and the corresponding parameters setup in MP should be set as below:
1
Check the first attitude, if POSI is (UP-UP) . If not, please toggle the switch to the right
position with - swt- is on
2
Turn the dial to the percentage rate on the transmitter LCD screen and PUSH to select
and turn the dial to modify
3
Check the PWM value of the corresponding flight mode on MP
[ ATTITUDE ]
CH: CH5
- rate - - posi - - swt -
STABL.
PHOLD
LOITER
ARCO
AUTO
HOVER
( ON )
( OFF )
( OFF )
( OFF )
( OFF )
( OFF )
SW3: SwC
SW2: SwD
Stabilize M.
Alt-Hold M.
Pos-Hold
RTL M.