Manual

Radiolink Electronic Ltd
www.radiolink.com
23
When setting the PWM value on transmitter, the corresponding PWM value on MP will
change accordingly. Each flight mode has the PWM range and when the value is within, it means
the current mode is set. Meanwhile, the selected mode on MP will turn dark green. That is ,
turning the dial on the transmitter to modify the RATE to make sure the corresponding PWM
value on MP is within the range. Flight mode 2/3/4/5/5 can be set as the same way.
The 2-way switch is needed when setting Mode 4 to 6. Toggle this switch to the
corresponding mode and can be set as the above step 3.
2.2.3.3 Failsafe Setup
The function of Failsafe on Mini Pix is set with MP menu.
Entering the Failsafe menu on MP, a note will pop out to remind no propellers installed for
safety.
Click OK to setup: