Manual

Radiolink Electronic Ltd
www.radiolink.com
24
There are different parameters setting such as throttle PWM, battery voltage to enable Mini
Pix failsafe function. When the set parameter is reached, eg. If the throttle PWM value or the
voltage is lower than the value set, then the failsafe is enabled and the aircraft will take
corresponding action such as Return to launch(RTL), Continue to flight and Landing. To ensure
the aircraft safety, RTL is normally set as the action following failsafe enabled.
Battery Failsafe Set
Battery failsafe can be set basing on the aircraft voltage consumption, battery volume or
flight distance to ensure the aircraft returning when the battery voltage is lower than the set value.
This value should be set according to the battery volume. Each battery cell should be 3.7V for long
distance flight while the set voltage is 3.7V times battery cell quantity. For example, the voltage
value set for 3S battery is 3.7V*3S=11.1V. When it’s lower than 11.1V, the failsafe function will be
enabled and the aircraft will Return to Launch automatically.
Battery detector needs to be set in MP to realize the RTL mode with low voltage.
Select the param. as described
Input the measured
voltage value
Input the capacity value