TX16S User Manual

6
1.6. Important note on Power and charging precautions.
TX16S has built-in USB-C charging function for 3.7v lithium
battery. The charging circuit is only suitable for 2x 3.7v
lithium-ion 18650 or 2x 3.7v Lipoly batteries (2s 7.4v Lipo
battery pack). The nominal battery voltage is 3.7v and the
maximum charging voltage is 4.2v.
Do not use a LiFE battery pack or 18650 lithium-ion battery
with a nominal voltage of 3.6v. Incorrect battery pack or battery.
Using this charging method may cause damage to the remote
control or fire.
Check the voltage and condition of the battery regularly and never charge it
unattended. Always charge in a safe area away from flammable materials. If the
remote control gets wet or damaged in any way, do not charge it.
RadioMaster is not responsible for any adverse consequences caused by using or
misusing this product in accordance with safety regulations.
1.7. Note about this guide.
This guide covers basic information about your radio. OpenTX software is very
powerful and has a large number of programming and mixing functions. Please visit
the site beloew for a comprehensive software installation guide for more detailed
instructions https://www.open-tx.org