Manualshelf

TX16S Instruction Manual

ManualsBrandsRADIOMASTER ManualsHobbyTX16S Max (Classic Silver CNC/Leather Luxury Edition) Hall 4-in-1 2.4GHz 16ch Multi-Protocol OpenTx RC Transmitter
31323334353637383940
36
Internal RF：Built-in wireless RF module, built-in 4in1 multi-protocol RF module, please refer to
multi-protocol RF module manual for usage
External RF：External RF module, compatible with many mainstream RF modules
Trainer：Trainer Mode
Mode：
Master/Jack
Audio cable connection, coach host mode
Slave/Jack
Audio cable connection, student slave mode
Master/Bluetooth
Bluetooth wireless connection, coach mode (requires external Bluetooth module)
Slave/Bluetooth
Bluetooth wireless connection, student slave mode (requires external Bluetooth
module)
Master/Multi
4in1 multi-protocol module coach host mode (This function needs to add an external
4in1 multi-protocol module as coach input receiver RX mode)
Binding
TX16 comes with a four-in-one multi-protocol high-frequency module, which is compatible with many
different protocols. To view the latest list of all compatible protocols, please visit https://www.multi-
module.org/. Please note that new protocols will be continuously updated and added to the latest
firmware. Some new protocols may require firmware upgrades.
· Please long press the MDL button to
enter the model settings. Under
Internal RF select MULTI in the SETUP
page, and select the protocol to be
used in the sub-options. The system
will automatically turn on the
corresponding RF module according
to the RF protocol you selected, and
turn off the other three RF modules
at the same time. The system will only
turn on one radio frequency module
at the same time to ensure that there
is no redundant radio signal
interference.
· Bind button is used to start the linking process.
· The Range button can reduce the power to 1/30 to facilitate testing the remote-control distance.
· Please note some protocols and receivers have different bind methods. Please refer to the bind
instructions of the model or receiver manufacturer or visit https://www.multi-module.org/. for
more binding tips
*** IMPORTANT WARNING ***
Frsky D8 & D16, S-FHSS, Corona, Hite, HoTT and other receivers using the CC2500
module MUST be frequency fine-tuned and range checked before flight.
See Frequency fine-tune information on the next page of this manual.