TX16S Instruction Manual

37
Frequency fine-tune
Once the radio is bound to the receiver:
Return to the RF Freq. fine tune option
1. Lower the value until the radio loses the connection with the receiver. Record the value
(TUNE_MIN).
2. Raise the value so that the connection is restored, then continue to raise it until the radio loses
the connection with the receiver again. Record the value (TUNE_MAX).
3. Calculate the median between the two values (TUNE_MIN + TUNE_MAX) / 2 = TUNE_MEDIAN
4. Set RF Freq. fine tune to the median value
Example
Connection is lost at -73 and +35; the median is -19:
Once the Fine-Tuning value is known, it can be used for all models which use the same
protocol.
For More information visit https://www.multi-module.org/using-the-
module/frequency-tuning
4.4.2. Flight Mode（Flight Modes）
The flight mode allows you to set the corresponding fine-tuning value for a
specific mission or flight behavior. This item is mainly used for fixed-wing gliders to use
different fine-tuning values in different environments. You can customize the fine-
tuning value of 1-6 channels, and you can set it for each flight. Mode setting smooth
slow-in slow-down time.